| Subject | Text |
| I need a users manual for a Samsung model TXB1940 H | Tbis TV was given to my kid, and I can't seem to get it to program it's Cable chanels in and could u |
| shema Samsung | Check this file:
http://www.eserviceinfo.com/download.php?fileid=7879
Thanks ! |
|
|
| DVD Stucked on Standby | Hello, I have a JVC DVD Player model XV-N312S and is stucked in Standby mode (Red LED On). Is Imposi |
| Hi Patrica,
My Brother bought the same TV a few years ago, and as you say it had been working per |
| BN44-00662A SCHEME | PLS. SEND ME SAMSUNG 40F6400 TV PSU SCHEME
CADR MODEL BN44-00662
THANKS YOU IN ADVANCE. MO |
| IBM G51 no display | I encountered one IBM G51 (6541-02E) with no display and LED on the front panel on orange state.Anyo |
| repair manual for this unit Toshiba (42hp66) | Thank you Gary,
I would like to find a repair manual for this unit (42hp66). It could be the pan |
| Re: power problems on a sony kp-41ds1u | [quote:6df13950be="kash_2005"]hi there
i have a sony rear projection tv kp-41ds1u with a power fa |
| Flat Screen TV Shop | a straight-forward shopping directory for flat panel televisions. check it out.
[URL=http://www.f |
| I don't have a schematic, most dishwashers have only a limited number of things that control the fil |
| Similar Problem with my Sony STR DE535.... | I have a Sony STR DE535 that kept "Blowing the 6.3amp fuse on the "Standby-Power" board,that is unti |
| Call Sharp and ask them how to clear the memory. I don't remember. The set came on so this indicates |
| sabotage! on zenith PV4661H | :? I given a zenith projection tv after it left a service shop and they couldn't get it fixed so I |
| shorted output | Hi, the blinking led on the front panel is telling you that you have a short
in thee amp, the bulge |
| Re: diagram | [quote:d9d12eaf63="picasso"]I have the crt panel-diagram.I can send it to you if you like.
PS : 1 |
| toshiba 32ZD26P tilt is off? | I don't know about this set but my colleague and I installed a new t.v once to a customer and notice |
| Samsung Plasma -no picture/sound -just clicks | Samsung 42SD 5SD -42" Plasma
No picture or sound. Turn it on, clicks and the neon flashes 5 |
|
|
| Humor me. "Float" one pin on each of the 6 front panel switches as a test. If the channel/ |
| More than likley the digital main board. It's not flashing a 1-1 which means panel, you have no soun |
| yamaha | hi
After u check the all channel - There isn't any shorts.
On the front board ( inside the panel ) |
| Is this external power supply or build in?
If it is external, just buy an adapter with proper power |
| Re: Looking for Samsung SV-5000W video head | [quote:27c9999426="vtech"]
WAIT...may not be the video head as it was a common problem with a lot o |
| Replaced TV | Ok well for the first time in my life I actually had a warranty and got a replacement TV. They repla |
| You must replace S301 and S302 (switch ) on front panel with switch that have gold contact
Regard |
| how to enter in service mode on a SONY KV-D 3410B ? | Hello,
I am looking for the way to enter in service mode with the Sony TV set KV-D 3410B. The u |
| Can you get access to the rear of the television to tell us what chassis is in your TV? Usually it' |
| Optimus STAV 3260 Receiver: Power relay clicks on & off | :?: When I plug the power cord into the supply socket, the relay nearest the internal fuses clic |
| was quite a common fault on this model, unfortunately the cure is to replace the lcd panel, not cost |
| [quote:3c9c28b759="fongs"]Hi,
1. Does the set power up?
2. Speakers - are they connected prope |
| Check 5v regulator, make sure the 5v supplied to micro ic at front panel, if you have oscilloscope c |